Mixer Package- Tronic Hospital Mixer with overlaying beep

PROPERTIES

• WMS-mixers with possibilities of wireless connection (subscription is required)
• Adjustable hygiene flushing, intervals and rinsing time (to avoid stagnant water)
• Logging of all flushings with point of time, water consumption and temperature for individual mixer or group of mixers (minimum, maximum and average values)
• Battery monitoring
• Built-in temperature measurements of mixed water temperature
• Programmable temperature stop, the mixer will turn off directly at set maximum temperature
• With mixing valve (but also provides cold drinking water as well as hot water only)
• Soft closing solenoid valve
• Safe against vandalism, complete in metal
• Eco (energy and water saving constant flow aerator, 5 l/min at 200–600 kPa)
• With fixed spout
• The mixer is activated by holding a hand in front of the sensor eye. Once started the mixer will run for at least 6 seconds and will continue to run as long as the hand is in front of the sensor.
• Flush Timeout – safety shut-off to prevent flooding, maximum of 60 seconds
• 60 sec. rinse time via sensor
• Can be turned off by solenoid valve (eg for cleaning)
• Low power consumption – Long life
• Equipped with system for thermal disinfection against legionella
• Battery operation, can be converted to mains operation
• IP class sensor, IP67
• Approved non-return valves, EN-Standard EN1717Installation:
• Note! Gateway and a subscription is required for WMS
• Automatic sensor calibration
• Easy to change battery, without turning off the water supply
• Mains operation requires installation of the AC adapter FMM S600132, and power supply FMM S600129 alternatively transformer FMM S600128Settings:
• Adjustable max temperature
• With Gateway and WMS:
  – Hygiene flushing with adjustable time and intervals
  – Initiate hot water rinsing
  – Programming of rinsing times, temperature alarm och temperature stops
  – Alert signal if exceeding the time limit for stagnant water (the latest flushing)